Reciprocator Automatic Powder Coating Gun for Enamel Powder Coating
Reciprocator Automatic Powder Coating Gun for Enamel Powder Coating Basic Info
Model NO.: MA3300D-enamel
Application: Hardware Spraying Equipment, Wood Spraying Equipment, Plastic Spraying Equipment, Porcelain Spraying Equipment
Certification: CE, ISO, SGS, BV
Warranty: 2 Year
Package: Wood Case
Type: Electrostatic Spraying Equipment
Method Type: Automatic
Apply to: Automatic Powder Coating
Specification: customized size
HS Code: 8424200000
Reciprocator Automatic Powder Coating Gun for Enamel Powder Coating Product Description
|Reciprocator Automatic Powder Coating Gun for Enamel Powder Coating ELECTRIC PARAMETERS|
|Working temperature range||0-40oC(+32oF - +104oF)|
|Compressed air of main interface diameter||8mm|
|Input air pressure||0.4-0.8Mpa(4-8bar)|
|Maximum water content||1.3g /m3|
|Maximum oil content||0.1mg /m3|
|PARAMETER OF SPRAYING GUN|
|Electrostatic polarity||Negative polarity|
|Maximum output voltage||120KV|
|Maximum output current||120μA|
|The weight of spraying gun||550g|
|The length of spraying gun||350mm|
|The length of powder tube||3.5m|
|The length of cable||3.5m|
|The Maximum powder output||650g/min|
SPECIFICATIONS OF MA3300D
Digital control system, display preset voltage and currency at the same time.
Preset voltage and currency could be setted by knobs, easy to operate.
Alarm automatically if over the preset parameters.
Adjust the output static electricity automatically according to the change of workpiece's size and distance.
Could supply a large amount of powder under low pressure.
The inside circuit region is independent sea, avoiding the powder incoming.
Good quality pressure gauge.
Good quality dust-proof powder switch.
Control the useless power strictly, low heating value, work continuously and steadily.
Powder Coating Gun ADVANTAGES OF MA3300D
(1)Fewer product rejects
(2)Simple and easy maintenance
(3)Transfer powder coating efficiently
(4)Equipped with deflector cone as standard
(5)Optimal service life for wear parts
(6)A wide range of spare parts, such as 20mm nozzle, Jet air drive pipe
(7)Tribo air to increase the intensity of the frictional charge
(8)Robust, using high quality materials and adopting compact structure
(9)Perfect coating results. Spray powder coating smoothly and thickness of powder film is uniform
(11)The On-gun remote control gives you the flexibility to adjust parameters without turning away from your work
(12)Mobile system with convenient stainless fluidized powder barrel, could find comfortable position for better coverage and faster coating
Powder Coating Gun Ergonomic design
(1)Light and handy: only 500 grams (without connecting leads)
(2)Well balanced ergonomic handling
(3)Better in-hand balance, high flexibility
Get higher productivity at a lower cost
(1)Compact and always ready-to-use, then minimize the downtime
(2)Easily activate the Power-Clean mode, change colors, clean gun easily and quickly
(3)Due to the precise regulation-technology and the gun-integrated dosing system, small amounts of powder can be applied, while still obtaining incredible results
(4) Could spary extremely complex workpiece, penetrate power coating into corners, angles and edges, then save powder and reduce labor