New Manual Powder Coating Spray Gun

New Manual Powder Coating Spray Gun Basic Info

  • Application: Hardware Spraying Equipment

  • Method Type: Manual

  • Suitable: for Powder Coating Producer or DIY Coating Job

  • Powder Output: 30 - 400 G/Min

  • Weight Without Connections: 130 G

  • Voltage: 220V/110V/380V

  • Gun Weight: 500g

  • Package: Carton Packing, 10kgs Per Unit

  • Origin: China

  • Type: Electrostatic Spraying Equipment

  • Certification: CE, ISO

  • Powder Coating System: Manual and Portable

  • Useful Capacity: 150 Ml (Approx. 90 G of Powder)

  • Air Consumption (Application Range: 1, 8 - 4 Nm3/H

  • Powder Cup Hopper Diameter: 66mm

  • Frequency: 50-60Hz

  • Specification: CE

  • HS Code: 8424899990

New Manual Powder Coating Spray Gun Product Description

New Manual Powder Coating Spray Gun

COLO-800DT-06C  powder coating unit Provides unsurpassed operator control, coating efficiency and ease of use.
No matter what your application needs,HICOLO has the right powder coating solution for you!

 

New Manual Powder Coating Spray Gun Application cup for COLO-800D  manual powder gun
 

The application cup is built exclusively for electrostatic coating with organic

powders. Any other use is considered as non-conform.
 

The application cup is especially suited for manual coating very small series,

test coatings at powder manufacturers, and for laboratory tests.

The powder types used are to be fluidized without vibration.
 

New Manual Powder Coating Spray Gun Typical characteristics

- The application cup is especially suited for working with minimum

quantity of powder

- Precise application parameters lead to repeatable application

performances

- The application cup enables a very quick color change

- The application cup can be connected to an COLO coating unit 

colo-06 powder gun by quick release connection - no extra device necessary
 

 

 

Workpieces typeOutput voltage1ST air 2nd air  Painting distance
Big size new80-100kv4-6kg/cm22-3kg/cm215-20cm
Corner,sides40-60kv2-3kg/cm20.5-1 kg/cm210-15cm
repaint20-30kv2-3kg/cm20.5-1kg/cm215-20cm


New Manual Powder Coating Spray Gun Maintenance and cleaning

Note:

Regular and conscientious maintenance increases the operating life

of the unit and ensures a longer, more constant coating quality

1. Empty any powder out of the application cup

2. Clean the gun and the outside of the application cup by blowing

off, wiping etc.

3. Release the bayonet closure between cup cover and cup

4. Clean the cup

5. Pull out the dip tube and clean it

6. Clean the cup with compressed air


New Manual Powder Coating Spray Gun.jpg