Insulating Oil Dielectric Strength Tester (IIJ-II)

       

Insulating Oil Dielectric Strength Tester (IIJ-II) Basic Info.

       

Model NO.:BDV-IIJ-I80KV Oil Tetser

       

Type:Insulating Oil

       

KV Voltage Tester Maxcapacity:<1000KN

       

Accuracy Grade:0.5

       

KV Voltage Tester Load Way:Electronic Load

       

Loading Method:Dynamic Load

       

Display:Digital

       

Control:Computer Control

       

KV Voltage Tester Weight:0-100Kg

       

Power Source:AC220V

       

Oil Cylinder Position:Top

       

Color:as Needed

       

Package:Wooden Case

       

Specification:CE; ISO; SGS

       

Origin:Chongqing, China

       

HS Code:9027809900

       

Insulating Oil Dielectric Strength Tester (IIJ-II) Product Description

    Series IIJ-II Insulating Oil Dielectric Strength Tester, Oil BDV Tester, connect computer by RS232

Why do we choose oil purifier?
After a period of operation, owing to its exposal to oxygen and mixed with water, copper and iron and other foreign materials and high working temperature acceleration, transformer oil will oxidize and lose its original property and cannot be used effectively again. So TOP oil purifiers can efficiently remove water, dirt, gases and other foreign impurities from oil, such as de-electrical oil, turbine oil, lubricating oil, engine oil, hydraulic oil, compression oil, mechanical oil, quenching oil, heat conducting oil, gear oil etc; So as to maintain its lubricating and insulating property, then to reduce components wear, and cut down oil expenses.

Insulating Oil Dielectric Strength Tester (IIJ-II) Application:
IIJ-II series fully automatic oil tester is apply to test the insulating oil's dielectric strength, which is designed as per the requirement of IEC156 Testing Method of Insulation Oil Medium Strength, which via proper programming, has got functions of auto boosting, step down, stirring, display and print out. After breakdown of oil medium, HV break off will operate within 10 seconds to enable an auto isolation of control system partly; This effectively safeguards the personnel security and equipment safety.


Insulating Oil Dielectric Strength Tester (IIJ-II) Main features:
1. Simply operate: Automatically (can be finished just press on key)
2. Menu controlled. Input data can clear
3. Can store 99 groups' oil testing data which is convenient to reading and print. The testing data can keep 100 years under the condition of power off.
4. System time can go on running under power off; (The system time just for reference can not be the standard of timing)
5. Can upgrade software through RS232
6. High capacity of anti-jamming and high precision of testing.
7. Small volume, light which operated in the open air very conveniently.

Technology and parameter data
1. Power supply: AC220V ± 10%, 50 HZ
2. Output voltage: 60 kV, 80 kV, 100 kV (100 kV should be specially designed)
3. Capacity: 1.2 kVA (for 60kV), 1.6 kVA (for 80 kV), 2.0 kVA (for 100 kV)
4. Pressure increase speed: About 2 kV/S
5. Voltage inspection accuracy: 3%
6. Dielectric strength sensitivity: <2KV
7. Wave from distortion: < 3%
8. Breakdown response time: <10ms
9. Polar distance: 2.5mm
10. Working environment: Temperature: 0 to 40 o C, humidity: <85% (Relative Humidity)
11. Storage environment: Temperature: -20 to 60 o C, humidity: <75% (Relative Humidity)
12. Working Altitude: < 1500 meters. (If over 1500m, it can be customized)
13. Dimensions and weight: 38 x 37 x 38 cm. Net: 40 kg (Approximately)

Our oil tester/ analyzer:
1. Transformer oil Breakdown voltage Tester (BDV test kit) series IIJ-II
2. Acidity tester model ACD-3000I
3. Karl Fischer Water content Tester Model TP-6A / model TP-2100
4. Fully automatic Interfacial Tension Analyzer model IT-800
5. Gas-Chromatography transformer oil gas analyzer model DGA2013-1
6. Multi-functional Vibration tester model TYD-2000
7. Consolidation Point Determinator model PT-2000
8. Kinematic Viscosity tester model VST-8 /model VST-2000
9. Flash point tester (open cup) model TPO-3000
10. Flash point tester (close cup) model TPC-3000
11. TAN-DELTA TESTER, 10kV Capacitance and Dissipation Factor Test Set model CDEF
12. Automatic Freezing Point & Pour Point Tester model TP-501Z
13. Determination of foaming characteristic of lubricating oil model SD-12579
14. Earth resistance tester model HYDW-II
15. Coil Resistance Tester (TPZC-40)
16. CT/PT tester model TPVA-404
17. Transformer turn ratio tester model HYG-II
18. Relaying Protection Tester model TPJB-III
19. Digital Grounding Resistance Tester model TP2571-II
20. DC High Voltage Generator model ZGF
21. Underground water/gold detector model TP-UWD

Power supplyAC220V±10%, 50Hz
Output voltage0-80KV (60KV.80KV)
Capacity1.2KVA (1.6KVA.2.0KVA)
Speed of pressure riseabout 2KV/S
Voltage test precision±3%
Breakdown sensitivity<2KV
Wave difference<3%
Time of breakdown<10ms
Working altitude<1500m (if over 1500m can be designed specially)
Dimension480mm*460mm*460mm
Working condition
Temperature30Celsius degree--40Celsius degree
humidityThe biggest comparatively humidity85%
Reserve circumstance
Temperature-20Celsius degree-60Celsius degree
humidityThe biggest comparatively humidity75%


Insulating Oil Dielectric Strength Tester (IIJ-II).jpg