Good Sale Auto Spray Booth
Good Sale Auto Spray Booth Basic Info
Model NO.: C600
Airflow Direction: Cross-flow Type
Paint Mist Treatment: Dry-type
Powder Booth Power: 14kw
Internal Size: 6900X3900X2650mm(Lxwxh)
Powder Booth Disc Dia.: 4m
Wall Panels: 60mm Thickness by Tongue and Groove Interlock, 8g
Specification: CE, ISO
Powder Booth HS Code: 84178090
Type: Powder Coating Booth
Powder Booth Coating: Painting
Heating Mode: Diesel
External Size: 7120X5400X3400mm(Lxwxh)
Voltage: 380/415V 50Hz,220V/60Hz
Powder Booth No Load Speed: 3m/S
Roof Panels: 0.6mm Galvanized Sheet
Powder Booth Package: Wooden Box
Good Sale Auto Spray Booth Product Description
|Inside booth||6900X3900X2650mm (LXWXH)|
|Metal-base||Type 1: 300mm metal-base, two rows of gratings, two outside ramps|
Type 2: 300mm metal-base, two rows of gratings, inside inclined ramps
Type 3: 300mm metal-base, two rows of gratings, no ramps, base-down
Type 4: No raised metal-base
|Wall panels||60mm thickness by tongue and groove interlock, 8g EPS insulation|
|Double skined by 0.326mm pre-painted steel sheet|
|Roof panels||0.6mm galvanized sheet|
|Main door||Three-fold common door: 3000X2600mm(WXH) with pressure lock|
|Service door||One service door: 2000X800mm(HXW) with pressure lock|
|Lights||Upper inclined lights,8 units,4X36W each|
|No side wall lights|
|Air intaking: 1X5.5KW turbo fan with CE motor, 18000m3/h||Air intaking: 2X3KW double-intake centrifugal fan ,18000m3/h|
|No air exhausting fan||No air exhausting fan|
|Frames by square tubes, single 1.0mm galvanized sheet|
|Ductings: 0.6mm galvanized sheet|
|By-pass||Electric damper from spraying to baking cycle|
|Heating||8 sets of infrared lights with specular reflect plate, 3KW/set, heating capacity|
|Filter system||Prefilter-----600G ceiling filter----- floor paint-stop filter|
|Control system||spraying, heating spraying, bake timer, indicator lights, hour timer, over temperature alarm, emergency stop, pressure gauge, Chinese contactor, Chinese temperature controller etc.|
Warranty will continue to be valid for a period of 12 months provided the following warranty conditions are observed.
1. This warranty is valid from the date of receiving equipments.
2. This warranty is given for the benefit of the first owner only and claims by parties other than the original purchaser will not be recognized, as the warranty is not transferable.
3. This warranty is only valid when the product has been used in accordance with the Installation, Operation, Maintenance and Instruction Manual and by a competent person trained in its use.
4. This warranty does not apply to damage or deterioration, which is caused by human.
5. During warranty period, shipping cost of replacement products or parts are our responsibility.
6. Beyond the warranty period, we provide spare parts to customers at factory cost.