Electrostatic Spraying Gun

Electrostatic Spraying Gun Basic Info
  • Model NO.: COLO-660

  • Application: Hardware Spraying Equipment

  • Fluidized Plate Method Type: Manual

  • Weight: 37kgs

  • Voltage: 110/220V

  • Warranty: 12months

  • Fluidized Plate Delivery Time: 2-3days

  • Delivery Way: by Sea, Air

  • Specification: CE

  • HS Code: 84243000

  • Type: Equipo De Pintura Electrostatica

  • Fluidized Plate Certification: CE

  • Used for: Electrostatic Spraying Gun

  • Packing Size: 84X52X68cm

  • Output Voltage: 0-100kv ( Adjustable)

  • Protection Type: IP54

  • Approvals: CE Certification

  • Origin: China

Electrostatic Spraying Gun Product Description
Electrostatic spraying Gun
Powder Coatng Equioment
Powder Coating Unit




Typical characteristics:
1, Control unit has one-touch intelligent operation button good for flat parts, complicated parts and recoat parts. Easy to operate.

2, suitable for the coating of every workpiece. Simple, flat workpieces; Workpieces with complicated shapes; The over-coating of workpieces which are already coated.

3, Pulse coating system
1). Save powder by 20% compare to Electrostatic Coating, for the average thickness of our products is 60 μ M compare to 70 μ M of the latter.
2). Can coat the objects' deepest corner by charging the powder continuously with low current and high voltage.
3). Can reduce orange peel effect significantly compare to common Electrostatic Coating machine.


Electrostatic Spraying Gun Configuration:
A control unit power supply cable
- A air filter
- A air pressure regulator
- A fluidized powder hopper
- A plug-in injector
- An manual powder gun with gun cable, powder Hose, rinsing air hose and standard nozzle set.
- Pneumatic hoses for conveying air (red), supplementary Air (black) and fluidizing air (black)
Powder hose
Ground wire

Data:
A) Control unit
Input voltage: 110V-220V
Frequency: 50-60Hz
Input powder: 50W
Pneumatic control voltage: 24V DC
B) Compressed air data:
Max. Input air pressure: 10bar/145psi
Min input air pressure: 6bar/87psi
Max water vapour content: 1.3G/nm
C) Powder Spray Gun
Powder yield: 600g/min
Gun powder: 550G
Connection cable: 5m


Packing Dimensions
Model No. COLO-660
Length: 84cm
Width: 52cm
Height: 68 cm
Weight: 37 kgs.

Manual coating equipment Function description
The powder gun through the powder hose. The powder is electrostatically Charged at the nozzle of the gun. In addition, an electrostatic field is Created between the gun nozzle and the grounded object. The charged Powder spray remains adhered to the surface of the object. The powder is fluidized by air forced through a porous plastic plate from Below. The powder acquires, thereby, fluid-like characteristics. The conveying air, supplementary air, and rinsing air are set on the control Unit

The process of the coating is like this: The powder is fluidized in the powder hopper. The injectors transport the powder through the hoses to the guns. The guns spray a powder/air mixture onto the workpieces


Electrostatic Spraying Gun