Ce Manual Powder Coating Booth for Car Wheel

Ce Manual Powder Coating Booth for Car Wheel Basic Info

  • Model NO.: PCR001

  • Application: Hardware Spraying Equipment, Wood Spraying Equipment, Plastic Spraying Equipment, Porcelain Spraying Equipment

  • Certification: CE, ISO, SGS

  • Condition: New

  • Quality: Best Quality

  • Work Type2: 2 Working Stations

  • Operate: Easy to Operate

  • Cabin System: Galvanized Steel

  • Control Cabinet: Chinese and English Display Panel

  • Package: Fumigation Free Wooden Case

  • Origin: China Qingdao

  • Type: Electrostatic Spraying Equipment

  • Coating: Powder

  • Method Type: Manual

  • Working Life: Long Working Life

  • Work Type1: on-Ground and Accessible

  • Work Type3: Exit and Entrance on Side

  • Control System: Digital

  • Work Station: 2 Spray Work Stations

  • Specification: Galvanized steel

  • HS Code: 8424899990

Ce Manual Powder Coating Booth for Car Wheel Product Description

There are 3 frequently used types of manual powder coating booth
On-ground type powder coating booth

On-ground type powder coating booth provides a relatively closed environment to stop the powder from going outside, which can not only avoid polluting the environment, but also recycle the powder. As the booth is installed directly on the ground, the operators and workpieces can freely go into and out of the booth. Also, it is very convenient for the operators to adjust the distance between the powder coating guns and workpieces, hence it can improve the quality of the painting work.
Powder Booth Description and application

Model No.Powder Booth
                   StructurePacking down, easy to transport
Ground type, staff could go inside for painting
External Size(mm)2580(L)*3355(W)*3040(H)
Internal Size(mm)2500(L)*2500(W)*2200(H)
Cabin SystemMade by galvanized steel, powder coated on the surface.
Powder Recovery SystemDust filter cartridges*6 sets, each size 600mm*?320mm
Solenoid valves*6 sets, the hole?20mm,DC24V
Circulation System1 set of centrifugal blower, 7.5kw motor, air flow6000-9000m3/h
The blower connected with booth by anti-flaming soft tubes
The exhaust vent of the blower could be adjusted in four directions
Blower Holder SystemMade by 80*80 square tubes
Independent from the booth to prevent the resonance and reduce the noise
Lighting System6 sets of explosion proof lights,2 LED lights,14W for each , total 12
Control System1 set, control the fan and powder recovery system
Chinese and English display panel,
All of fan, recovery system, lighting system can control independently

2 working stations manual powder coating booth

MaterialMade of galvanized steel, high smoothness, prevent to get rust, and high spray adhesion.
Surface treatmentElectrostatic powder coated surface, smooth and easy to clean.
Bases structureAssembled structure, easy to transport
Roof shapeArc structure on the top, easy to clean.
Work station2 spray work stations
Recovery system2 set of automatic pulse blow-back single-stage recovery system
Fixed FanFan is supported on the holder
Shock absorption of Fanshock absorption cushion
ShockproofThe blower connected with booth by anti-flaming soft tubes.
Winding directionBlower's outlet can be adjustable in four direction (90 degrees)
Control cabinetChinese and English display panel, all the fan, recovery system, lighting system can control independently
Control methodDigital pulse control, by setting parameters of off memory, you can control pulse width, pulse interval, quantity of pulse unit and checking if the function of pulse blowback is working properly

Powder Booth Single station booth(Exit and Extrance on the sides)

Except 2 working opening, there are also 1 exit and 1 entrance opening on opposite sides. There is a rail throughout the booth, thus the workpieces can drift in-and-out the booth through the rail. Its apply to the coating of large panel workpieces.
The booth is made of galvanized steel, powder coated on the surface. That made it beautiful, long servicing life and easy cleaning.
Powder Booth Packing down, easy to transport.
Isolated LED proof light, achieving rated brightness in 0.5s after electrify.
4 units pulse blowback single-stage recovery system, cleaning the blocking powder on the filter automatically.
Independent blower holder, connected with the booth by a soft anti-flaming tube to prevent the resonance and reduce the noise.
The independent carriage of Fan can adjust the direction of air exhaust( 90 degrees spacing rotation ), convenient to connected to the outside with PVC tube.
There is a interface  that transformed square to round on the outlet of the fan, thus the standard circular PVC tube can be used as the exhaust duct, allowing for easy installation
Back to the recovery system, it set up 2 doors with sealed strip. People shouldn't enter the booth when changing filters.
Door lock of the recovery system has the function of automatic tension, it can able to compact sealed strips, in case of powder leakage.
Bilingual board, digital pulse control programmer, pulse control the microcomputer core, digital display, set and use easily and stable operation.

If you interested in our products, please feel free to contact me. We can customized all kinds of equipment about powder coating and provide you a solution according to your actual conditions. 

Ce Manual Powder Coating Booth for Car Wheel.jpg